EV Charger Installation Cost Calculator
Updated 2026-08-16 · Texas figures
Answer five questions and this gives you a low-to-high range with every line item shown, so you can check the arithmetic and take it into a quote conversation. It deliberately doesn't produce a single confident number — nobody can price your job without seeing your panel.
Your estimate will appear here.
Where these numbers come from
Every line item below is a published range, not our invention. Base installation and panel figures come from HomeAdvisor, EnergySage and HomeGuide, retrieved August 2026. Permit figures reflect typical Texas municipal electrical permit and inspection fees; confirm with your city.
| Line item | Range used |
|---|---|
| Install, run under ~15 ft | $400–$800 |
| Install, run ~15–40 ft | $650–$1,150 |
| Install, 40+ ft or exterior conduit | $900–$1,500 |
| Hardwired instead of outlet | +$100–$300 |
| Load-management device | +$300–$700 |
| Panel upgrade | +$1,500–$3,500 |
| Level 2 charger hardware (40–48A) | $350–$700 |
| Permit + inspection | $50–$250 |
The estimate does not subtract rebates. Austin Energy and CPS Energy both run charger incentives that can offset several hundred dollars — current Texas rebate guide. Most rebates require a permitted, code-compliant installation.
Common questions
How much does it cost to install an EV charger?
Most straightforward Level 2 installations run $400 to $1,500 in Texas including permit, with the charger itself adding $350 to $700 if the installer supplies it. A panel upgrade, when required, adds $1,500 to $3,500.
What makes EV charger installation more expensive?
The three big drivers are distance from the electrical panel (longer runs mean more wire, conduit and labor), whether your panel has spare capacity for a 40 to 60 amp circuit, and whether the charger is hardwired rather than plugged into a NEMA 14-50 outlet.
Does this calculator give a quote?
No. It produces an estimate range built from published national cost data and shows the arithmetic for each line item. Only a licensed electrical contractor who has seen your panel can quote the job, and you should get three itemized quotes.
Next steps
Take your range to three licensed electrical contractors and ask each for an itemized quote — the five checks are what separate a good quote from a cheap one. Confirm the permit is in the price, and read the full cost breakdown for what drives the differences.